Come fly with DIY Star @KittyCrafts8200!

Build a star-shaped paper glider from cardstock, tape, and straws. Test flight balance, adjust wing shape, and explore simple aerodynamics safely.

Papercrafting30 min8 materials
Get instructionsMore activities
Come fly with DIY Star @KittyCrafts8200!
Come fly with DIY Star @KittyCrafts8200!
30 minHands-on fun
15 steps →

About this activity

Build a star-shaped paper glider from cardstock, tape, and straws. Test flight balance, adjust wing shape, and explore simple aerodynamics safely.

What you need

🧰cardstock🧴tape🧰drinking straws✂️scissors📏ruler✏️pencil🧰colouring materials🧰adult supervision required

Step by step

  1. 1

    Step 1

    Gather the materials listed.

  2. 2

    Step 2

    Draw a 5-point star about 20 cm across on the cardstock using your pencil and ruler.

  3. 3

    Step 3

    Cut out the star shape carefully with scissors.

  4. 4

    Step 4

    Mark the exact center of the star with a small pencil dot.

  5. 5

    Step 5

    Cut two small slits opposite each other through the star so the slits form a straight line across the center.

  6. 6

    Step 6

    Cut two straws to the width of the star using the scissors.

  7. 7

    Step 7

    Slide the two straw pieces through the slits so they cross under the star to form a rigid cross.

  8. 8

    Step 8

    Tape the straws at the center on both the top and bottom of the star to secure them.

  9. 9

    Step 9

    Fold up about 1 cm of the back edge of each star point to make tiny winglets.

  10. 10

    Step 10

    With an adult nearby gently toss the glider level from eye height to test its flight.

  11. 11

    Step 11

    Watch how the glider flies and notice if it tilts left or right dives or loops.

  12. 12

    Step 12

    If the glider tilts to one side add a tiny piece of tape under the opposite star tip to balance it.

  13. 13

    Step 13

    If the glider dives or stalls gently bend the back edges of each point down about 2 mm to increase lift.

  14. 14

    Step 14

    Decorate your glider with colouring materials.

  15. 15

    Step 15

    Share your finished glider on DIY.org.

Fun facts

✈️The world record for the longest paper airplane flight is 226 ft 10 in (69.14 m), thrown by Joe Ayoob with a design folded by John Collins.
🎯For a stable glider the center of gravity often sits about one-third of the way back from the nose—move it and the plane may nosedive or stall.
🥤Gluing a drinking straw along a wing or body acts like a spar (a spine) to keep the wing stiff and help the glider fly straighter.
🌬️Small wing tweaks like camber (curvature) and dihedral (upward wing tips) change lift and make toys more or less stable in flight.
⭐Star-shaped wings increase total surface area and can produce slow, floaty flights that are great for safe indoor testing and experimenting.
✈️The world record for the longest paper airplane flight is 226 ft 10 in (69.14 m), thrown by Joe Ayoob with a design folded by John Collins.
🎯For a stable glider the center of gravity often sits about one-third of the way back from the nose—move it and the plane may nosedive or stall.
🥤Gluing a drinking straw along a wing or body acts like a spar (a spine) to keep the wing stiff and help the glider fly straighter.
🌬️Small wing tweaks like camber (curvature) and dihedral (upward wing tips) change lift and make toys more or less stable in flight.
⭐Star-shaped wings increase total surface area and can produce slow, floaty flights that are great for safe indoor testing and experimenting.

How do I build a star-shaped paper glider from cardstock, tape, and straws?

Fold a star template from cardstock, cut it out, and lightly score fold lines at each point. Attach a straight drinking straw along the center back with clear tape to act as the fuselage. Bend the star points slightly upward for wing dihedral. Add a short straw piece or tape under the nose for balance. Test small throws, observe flight, then trim or add tiny paper-clip weights to the nose or tail to improve stability.

Go deeper

What materials do I need to make a DIY star glider?

You’ll need cardstock or heavy paper, a pencil and ruler to draw the star, child-safe scissors, clear tape, drinking straws (one for the fuselage and small pieces for supports), and small paper clips or a bit of clay for fine balance adjustments. Optional: markers for decorating, a template printed at the right size, and an adult for cutting and tape placement.

Go deeper

What ages is the star paper glider activity suitable for?

This craft suits preschoolers to school-age kids with different supervision levels: ages 4–6 can decorate and help assemble with close adult assistance for cutting and taping. Ages 7–10 can usually cut and test with minimal help. Older children can experiment with aerodynamics and balance. Avoid small parts around under-3s and supervise test flights to ensure safe play.

Go deeper

How can we fly star gliders safely and what should we watch for?

Fly in an open, obstacle-free space like a yard or gym, not near windows, stairs, or traffic. Never aim gliders at people or animals’ faces. Keep sharp tools and small balancing weights away from toddlers. Check taped seams and smooth any rough edges. Supervise launches and adjust wing angle gradually—small changes make big differences. Store gliders and small parts securely to prevent choking hazards.

Go deeper

Watch & Learn

Need help?

I don’t have cardstock or plastic straws—what can I use instead?

Use cereal-box cardboard or two sheets of printer paper taped together in place of cardstock, and swap the straws for two short craft sticks or wooden skewers cut to the width of the star and slid through the slits.

My glider keeps tilting or wobbling—what should I check and fix?

Make sure the two slits are exactly opposite each other and the straw cross sits at the marked center, re-tape the straws top and bottom at the center (step 7), and add a tiny piece of tape under the opposite star tip if it still tilts (step 11).

How can I adapt this activity for younger children or older kids who want more challenge?

For younger kids have an adult draw and cut the 20 cm star and pre-cut the slits and straw pieces while older kids can measure and cut the star themselves and experiment with changing the 2 mm bend of the back edges to tune lift (step 12).

What are some fun ways to improve flight or personalize our star glider?

Try adding a small paperclip as ballast at the center to adjust balance, make the 1 cm winglets differently folded for varied handling, decorate with colours and stickers, and then share your finished glider on DIY.org as suggested.

Your first game is on us.

Describe a game below - no sign-up needed to try.

KidsGPT has moved to ChatDino — powered by AstroSafe

Make me

DIY.org

Kid-safe AI for discovery and learning. Ask anything, explore everything, learn with confidence.

Product

  • Pricing
  • App
  • All Apps

Resources

  • Blog
  • Kids Wikipedia
  • Worksheets
  • Activities for Kids
  • Build a Hacker Simulator
  • SafeTube

Company

  • About
  • Terms & Conditions
  • Privacy Policy
  • AstroSafe
TwitterInstagramYouTube

© 2026 DIY.org. All rights reserved. · Powered by AstroSafe