Make a rope ladder
Make a rope ladder using rope and dowels, learn measuring and knot tying skills, test its strength safely with adult supervision.

About this activity
Make a rope ladder using rope and dowels, learn measuring and knot tying skills, test its strength safely with adult supervision.
What you need
Step by step
- 1
Step 1
Gather all materials and bring them to a clear flat workspace.
- 2
Step 2
Lay the two ropes side by side on the floor with ends even.
- 3
Step 3
Decide how far apart you want each rung to be (8β12 inches is a good choice).
- 4
Step 4
Use the tape measure to mark the first rope at each rung position from one end using the marker.
- 5
Step 5
Match and mark the same positions on the second rope so both ropes have identical marks.
- 6
Step 6
Place a dowel between the two ropes at the first pair of matching marks.
- 7
Step 7
Tie a tight overhand knot with the first rope around the end of the dowel to hold it in place.
- 8
Step 8
Tie a tight overhand knot with the second rope around the other end of the dowel to secure the rung.
- 9
Step 9
Repeat placing a dowel and tying knots for each remaining pair of marks until all rungs are in place.
- 10
Step 10
Trim excess rope tails close to each knot with scissors leaving a small tail for safety.
- 11
Step 11
Smooth any rough dowel ends lightly with sandpaper so they are safe to touch.
- 12
Step 12
Check every knot and rung by giving each one a firm tug to make sure they do not slip.
- 13
Step 13
With an adult, attach the ladder low to a strong anchor point using a secure knot the adult approves.
- 14
Step 14
With adult supervision, test the ladderβs strength by gently adding weight one step at a time.
- 15
Step 15
Share a photo and description of your finished rope ladder on DIY.org.
Fun facts
How do you make a rope ladder?
To make a rope ladder, measure and cut two equal lengths of strong rope, leaving extra for knots. Cut dowels to your chosen rung length (and sand the edges). Mark equal spacing on both ropes, then either drill holes through each dowel and thread the ropes or tie dowels between the ropes with tight overhand or clove-hitch knots. Keep rungs level as you tie, trim excess rope, and have an adult securely anchor and test the ladder gradually.
What materials do I need for a rope ladder?
Youβll need two lengths of durable rope (nylon or polypropylene), several wooden dowels cut to rung length, measuring tape, marker, and sandpaper. For assembly, have a drill and bit (for threading) or just scissors/knife for finishing knots, plus a saw or pre-cut dowels. Also use a strong carabiner or heavy-duty anchor and safety gloves and goggles for adult helpers. Optional extras: paint, tape, or colored markers to decorate or code rungs.
What ages is this rope ladder activity suitable for?
This craft is best for children about 6 years and up with adult supervision. Ages 6β8 can help measure, mark spacing, and learn simple knots while an adult handles cutting and drilling. Ages 9β12 can take on more independent measuring and knot-tying, still with tool use limited to adults. Younger kids (3β5) can participate by decorating and counting rungs but should not use saws, drills, or test the ladder.
What are the safety tips and variations for testing a homemade rope ladder?
Always supervise testing and use rope rated for expected loads. Anchor to a solid structure, inspect knots and dowels, and perform a gradual load testβapply weight slowly, then allow short steps. Replace frayed rope or cracked dowels immediately. For variations, try PVC or thicker wooden rungs, change rung spacing for skill levels, or color-code rungs for games. Never allow unsupervised climbing and consider helmets for younger children during testing.
Watch & Learn
Need help?
What can we use if we can't find dowels or climbing rope?
If wooden dowels are hard to find, use short sections of sturdy PVC pipe or trimmed broom handles as rungs and replace thin cord with strong nylon or climbing rope, with an adult checking the chosen rope before tying the overhand knots.
What if the rungs keep slipping or knots come loose?
If rungs slip after you 'tie a tight overhand knot', retie using a double overhand or constrictor knot, wrap the dowel ends with tape before knotting, and then follow the instruction to give each rung a firm tug to recheck security.
How can we adapt the ladder for younger or older kids?
For preschoolers, make a short ladder with closer 6β8 inch spacing, use pre-cut dowels and have an adult do the overhand knots and attach the ladder low to a strong anchor, while older kids can measure, mark with the marker and tape measure, and tie each knot themselves.
How can we make the ladder look nicer or stronger?
To personalize and strengthen the ladder, lightly sand and paint each dowel after smoothing, wrap each rung end with colored electrical tape for extra grip before trimming tails, and add a name tag or decorative knots prior to sharing your photo on DIY.org.